Tapping - Threading Machines

Cambia Idioma a Espaņol

- Machines are gear driven and the speeds can be changed by pulley
- They are suitable for inside as well as outside threading with taps & round split dies respectively
- In the Vertical model machine, the spindle of machine travels automatically with the help of a suitable lead screw (as per the threading job). The travel of the spindle can be reversed and stopped with the help of limit switches provided
- All the gears and shafts are tempered and ground and the pillar shafts are hard chromed
- In the Horizontal model machines, the tailstock moves with gunmetal bushes on Hard Chromed Shafts
- In the Horizontal model machines, the threading can be controlled to the desired position and reversed by a built-in stopper (in model Horizontal TR-20/25) and by limit switches control stopper (in model Horizontal TR-20/40)


Vertical Machine
Model: Vertical TR-20/40
(Lead Screw Type)
Spindle Speed (rpm): 100 - 400
Capacity of inside & outside threading
     in coarse pitch (mm):
     in fine pitch (mm):		 20
40
Spindle Travel (mm): 100
Table Size (mm): 150 x 250
Electric Motor (HP): 2.0
Net / Gross Weight (kgs.): 200 / 350
Dimensions (m): 1.1 x 0.6 x 1.9
Shipping Volume (m3): 1.25

Standard Accessories: Electric Motor, Panel Board, Jig Fixture, one set of lead screw, die holders for round split dies for outside threading of size 1", 1.5" and 2", tap holders for inside threading of range up to 13 and 40 mm, coolant system including electrical pump, tank, filters, etc.
Optional Accessories: 150 mm Self Centering Chuck in lieu of jig fixture, additional sets of lead screw as per job requirement
Model: Horizontal TR-20/25 Horizontal TR-20/40
(Limit Switch Type)
Spindle Speed (rpm): 100 - 300 50 - 600
Capacity of inside & outside threading
     in coarse pitch (mm):
     in fine pitch (mm):		 20
25		 20
40
Thread length range (mm): 5 - 125 5 - 150
Electric Motor (HP): 1.0 2.0
Net / Gross Weight (kgs.): 120 / 220 150 / 250
Dimensions (m): 0.8 x 0.5 x 1.1 1.0 x 0.5 x 1.3
Shipping Volume (m3): 0.45 0.65

Standard Accessories:  Electric Motor, Switch, Collet Fixture of Type A-25 of range 1-25 mm (and also of Type A-40 of range 25-40 mm with TR-20/40), die holders for round split dies for outside threading of size 1", 1.5" (and also 2" with Model TR-20/40), tap holders for inside threading of range up to 13 mm and 25 mm (40 mm instead of 25 mm with TR-20/40), coolant system including electrical pump, tank, filters, etc.
Optional Accessories: Self Centering Chuck or jig fixture in lieu of Collet Fixture, die holders for round split dies for outside threading of size 13/16" & 2" (with Model TR-20/25)


Horizontal Machine

Maneklal and Sons (Exports)
67 Bajaj Bhavan, Nariman Point, Mumbai - 400021, INDIA
Tel: +9122-22041340 / 41 / 42. Fax: +9122-22041389
WhatsApp: +918879795490
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com / Enquiry Form

 Home   Top

TO OUR PAGE ON MACHINE TOOLS

Back     Next